Brian's Web Page
Project #1
1981 Chev 3/4 ton 4x4

This is the cone out of a front axle bearing.  This is the first thing to look at when diagnosing bearing condition.



 
 
 
 

.
This is an axle seal off an GMC truck  the spring was out of place this caused it to leak.
 
 

This badly worn brake pad was caused by foreign material on the pad.

This is a rotor that has just been machined
 
 
.
.
.
This is a new bearing notice that there is no brown heat marks on it. 
On project # 1 the truck had a brake squeal the customer said that the rear brakes were just replaced .I checked the front brakes they were worn badly, I also checked the front wheel bearing and discovered that the were over heated .the front axle seals were also needed to be replaced.
 
 
 
 
 
 
 
 
 

               SOME MORE PROJECT'S


During the year in automotives twenty I had the chance to do allot of other projects . Here is a list of some of the things that I did.

One car needed spark plug wires, distributor and rotor because of corrosion in the wires . the corrosion is the green stuff in the pictures.

This is the timing belt off a Volkswagen, to replace a timing belt you have to follow careful step to insure the  timing is set right.

These are pictures of a rack and pinion out of a dodge caravan, this one had a broken boot which caused it to leak,so it needed to be replaced.

Other jobs that I have done
- fuel filter changes
-replace spark plugs
-replace and put new brushes in an alternator
- replaced power steering hoses
-replaced CV shafts
-replaced CV boots
-changed tires
-repaired tires